Star Micronics XB24-15 Printer User Manual


 
You may need to set some DIP switches inside the printer before you start
using it. These switches enable you to configure the printer as an Epson or
as an IBM Proprinter printer. The DIP switches also enable you to select a
character set other than the USA character set, if your supplier has not
already set these up for you. The DIP switch cover is located inside the top
cover (see below). Use the end of a paper-clip (or similar) to set the switches.
Details of these switches are given in Chapter 5. If you feel unsure as to your
ability to set these switches, contact your supplier.
DIP switch cover
6