Star Micronics XB24-15 Printer User Manual


 
rTPrint head bolts
Print head
NOTE
DO NOT apply excessive force, as this may result in damage to the print head.
9 Fasten down the new print head using the retaining washers and screws.
Do not apply excessive force when tightening the screws, as this may strip
be thread, but ensure that the print head is firmly secured.
10 Replace the ribbon cartridge.
11 Replace the top cover.
12 Re-insert the power cable and re-apply power. Your printer may now be
used. You may like to check the print quality using one of the test print
procedures (see below).
85