Star Micronics XB24-15 Printer User Manual


 
Select next horizontal print position (by dot)
Both
<ES0
$
Cd>
1Bh 24h elo>
all>
27 36
elo>
OrI>
The command above will start subsequent printing at a horizontal position deter-
mined by dot spacing, where 010> and oil> am two binary numbers (low byte first)
specifying the number of dots (at l/60 inch spacing) by which the print head will
move to the right from the left margin. If the subsequent print position is beyond the
right margin, then printing will start at the left margin.
Move print head
Standard
cESC>
\
db
al>
1Bh 5Ch
<no> al>
27 92
cd>
The command above moves the print head relative to the last print position, where
ore> and cnl> are two binary numbers (low byte fast) specifying the amount (in
inches) by which the print head will move from the last print position. When in draft
mode, the number represented by the parameters signifies movement in 1/12Oths
inch, and when in LQ or SLQ mode, movement is carried out in l/MOths inch. A
positive value will move the print head to the right, and a negative value will move
it to the left. See “Numerical Representation” for details of how negative values are
represented in this way.
52