Star Micronics XB24-15 Printer User Manual


 
I Set top-of-form
IBM 1
<ESC>
4
1Bh
34h
27 52
Thecommandabovesetsthetopof-formpositionat thecurrentpaperpositionlhere
are no parameters. On receipt of this command, the top-of-form position will be set
to the current paper position.
Margins and vertical tab setting control codes
1 Move to next vertical tab position
Both 1
OBh
11
The command above moves the paper to the next vertical tab position. There are no
parameters. On receipt of this command, the printer prints data stored in the print
buffer, and the paper moves to the next vertical tab position or (if there are no more
vertical tab positions on the page), to the top of the next page. If no vertical tab po-
sitions have been set with the cESD B command or if they have been cleared, the
paper moves forward by one line.
1 Set vertical tab positions
Both 1
cESC>
‘1Bh
27
B
42h
66
. . .
. . .
. . .
cd>
enI>
all>
CNULB
OOh
00
The command above sets vertical tab positions, where the values represented by
010> to cnl> are binary values giving the vertical tab positions in lines from the top
of the page. The values given must be in ascending order. If they are not, the squence
will be terminated. The sequence must end with a <NUL> (ASCII OOh). If no values
are given between the cESC> B and the &IUL>, then all vertical tab positions pre-
viously set will be cleared. Printing will starton the (<n>+l th) line in standard mode,
and the (olxh) line in IBM mode.
45