Filter
Top Products
Backspace Both
CBS>
08h
8
The command above moves the print head back one position. There are no
parameters. This command moves the print head back one position (at current
spacing) to the left. If proportional spacing has been selected, the print head will
move back by a distance equal to the width of the last character printed. It does not
delete the last character.
Cancel last character
Both
<DEL>
7Fh
127
The command above deletes the last character transmitted to the printer. There are
no parameters. This code is effectively a destructive backspace.
Cancel last line
Both
<CAN>
18h
24
The command above deletes the last line transmitted to the printer. There are no
parameters. The last line transmitted to the printer will be erased from the printer’s
buffer.
Set printer off-line
Standard
<Dc3>
13h
19
The command above sets the printer off-line. There are no parameters. This com-
mand is not equivalent to pressing the
0~ LINE mu button on the front panel when the
printer is on-line, as after the cDC3> command has been received, the printer will
ignore any data transmitted to it, except for the +&Cl> command (below).
62