Star Micronics XB24-15 Printer User Manual


 
1 Set/cancel shadow/outline printing
Standard 1
cESC>
4
1Bh 71h
27
113
<n>
<n>
<n>
The command above sets or cancels shadow or outline printing, where <n> is a
binary value from OOh through 03h. The values of o1> are given in the table below:
Any other values of <n> are invalid and will be ignored.
Line space control codes
Line feed
<Lib
Both
I OAh
I
10
I
The command above advances the paper one line. There are no parameters. If Auto
CR has been selected, a carriage return will also be generated on receipt of a Line
Feed character. l/6 inch line spacing will automatically be selected at power-on.
3
Reverse line feed Both
cESC>
<LB
1Bh
OAh
_-
27 10
The command above will reverse line-feed the paper one line. There are no
parameters. l/6 inch line spacing is automatically selected at power-on.
36