Star Micronics XB24-15 Printer User Manual


 
[ Set top margin
Both 1
<ESC> C
1Bh
63h
27 99
The command above sets the top margin, where-> is a binary value which specifies
the height of the top margin to the first printed line in lines (at the current line pitch
setting). Printing will start on the (ot>+lth) line on the page. Subsequent changes
to the line pitch setting will not affect this value.
Set bottom margin
<ESC> N Cn>
Both
( 1Bh 4Eh <tD
27 78
CID
The command above sets the bottom margin, where cn> is a binary value specifying
tbe bottom margin depth in lines at the current line pitch setting. If the page length
is reset (with the cESC>c or <ESCX<NUL> commands), the effect of this
command will be lost. Subsequent changes to the tine pitch setting, however, will not
affect the length set by this command.
Cancel top and bottom margins
(Esc> 0
1Bh 4Fh
27
79
Both
The command above cancels the settings for top and bottom margins. There are no
parameters.
1 Set left and right margins
Both 1
<ESC> X <ID
Cn>
1Bh
58h
27 88
The command above sets the left and right margins, where the two values repre-
sented by the 01x are binary numbers used for setting the left and right margins
respectively. Margins are set at the current horizontal pitch.
47