Filter
Top Products
3-4 Sun Netra CP3240 Switch Installation Guide • September 2009
3.1.5 P8(3-4) Fabric Write Protect
This jumper configures write protection on the Fabric reset configuration word.
3.1.6 P9 IPMC Firmware Program
These jumpers configure IPMC firmware write actions via the debug serial port.
3.1.7 P10(1-2) IPMC Reset
This jumper configures the IPMI subsystem reset function.
TABLE 3-6 P8 (3-4) Fabric Write Protect Jumper Settings
P8(3-4) Default Function
ON Disable the write protection of the Fabric reset configuration word
OFF Default Write protect the Fabric reset configuration word
TABLE 3-7 P9 IPMC Firmware Program Jumper Settings
P4 Default Function
OFF Default Normal operation
1-2 Install to program IPMC firmware via the debug serial port
3-4 Install to program IPMC firmware via the debug serial port
TABLE 3-8 P10 (1-2) IPMC Reset Jumper Settings
P10
(1-2) Default Function
ON Disable IPMI subsystem (hold it in reset)
OFF Default Enable IPMI subsystem