Filter
Top Products
viii Sun Netra CP3240 Switch Installation Guide • September 2009
3.1.2 P6(1-2) Fabric Zero Reset Configuration Word 3–3
3.1.3 P6(3-4) Base Zero Reset Configuration Word 3–3
3.1.4 P8(1-2) Base Write Protect 3–3
3.1.5 P8(3-4) Fabric Write Protect 3–4
3.1.6 P9 IPMC Firmware Program 3–4
3.1.7 P10(1-2) IPMC Reset 3–4
3.1.8 P10(3-4) IPMC FWE 3–5
3.1.9 P11(1-2) Forced-Board Enable 3–5
3.1.10 P11(3-4) IPMC Board Reset 3–5
3.1.11 P12(1-2) and P12 (3-4) EMI Ground to Logic Ground 3–6
3.1.12 P13 Serial Direction 3–6
3.2 Jumper Locations 3–7
4. Configuring Switch Software 4–1
4.1 IPMI Firmware Sensors 4–2
4.1.1 State Sensors 4–2
4.1.2 Threshold Sensors 4–4
4.2 uBoot 4–5
4.2.1 uBoot Console 4–5
4.2.2 E-Keying Control in uBoot 4–6
4.2.3 Serial-Baud Rate Control in uBoot 4–7
4.3 Linux 4–7
4.3.1 e-Keying 4–7
4.3.2 e-Keying Bypass 4–8
4.3.3 ATCA LEDs 4–8
4.4 Serial Select 4–8
4.5 Serial Location 4–9
4.5.1 Changing Serial Location from UBoot 4–9
4.5.2 Changing Serial Location from FASTPATH 4–9