Filter
Top Products
4-20 Sun Netra CP3240 Switch Installation Guide • September 2009
4.10.3 Logins and Prompts
FASTPATH supports multiple users with different security levels. By default, there
is one admin user with no password. In the CLI, privilege mode is
password-protected separately from the default mode, but also has a default of no
password.
4.10.3.1 CLI Defaults
A CLI is provided on the serial console, telnet console, and SSH console. The serial
console is always enabled. The telnet console is enabled by default. SSH is
disabled by default.
The prompts always show the current mode. Here are a few examples.
4.10.3.2 Web Interface Defaults
The username and password are the same as the CLI. The web interface is enabled
by default. Java is enabled by default. HTTPS is disabled by default.
interface 0/x Switch to interface mode. You must be in
interface mode to change most port specific
settings.
configure
vlan participation include x Add interface to VLAN x. interface
vlan pvid x Change interface’s pvid to VLAN x. interface
Username:admin
Password:
>enable
Password:
#
default mode
# privilege mode
# configure mode
(interface 0/2)
# interface 0/2 mode
TABLE 4-6 Basic CLI Commands (Continued)