Filter
Top Products
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
Initial Conguration (4:4)
Configuration of the MPS using Web Interface
Open a web browser and type in the IP address to
access the web interface. The IP address to enter
was configured from the LCD during the installation
process.
Dial In Configuration
Navigate to MCU Configuration > Dial In Numbers:
Configure one or more of the following numbers and
aliases to enable the MPS to know which confer-
ence number to dial into.
ISDN Number.• The ISDN number must be a valid
PRI number of the TANDBERG MPS at hand.
E.164 Alias. • The H.323 E.164 numeric alias for
each conference.
The Single Dial In Number allows the MPS to set
up multiple conferences, in an Ad Hoc manner by
the user dialling in to a single number.
You may configure and create different types
of conferences. Please refer to section MCU
Configuration > Dial In Numbers for details.
Simple Dial In Configuration
Save - Press the Save button to save changes.
Simple Dial In Conguration
35
Introduction
Using
the MPS
System
Status
System
Configuration
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
Quick
Setup