Filter
Top Products
D 13373.08
NOVEMBER 2007
MPS
Table of
Contents
TANDBERG MPS
ADMINISTRATOR GUIDE
Table: Example with four different call settings:
PRI Board Configuration
!
Please ensure that Network Type is set to G.703 for
the correct ISDN cards in the PRI Network Configura-
tion.
Network Configuration
Channel (1 to 5)
For each G.703 Leased Line interface it is possible to
define one or more calls. Each call is identified by a number
(“call-id”), a start channel and max number of channels. The
maximum number of possible calls is 5.
G.703 Board
Leased Line is a non-dialling protocol. Should be used when:
One codec is connected in a point to point connection1.
Through an ISDN switch supporting G.703 Leased Line 2.
mapping.
Save - Press the Save button to save changes.
Start Channel (1 to 5) Max Channels (1 to 5)
E1: Start channel <1..31> Max channels <0 (Off), 1..31>
T1: Start channel <1..24> Max channels <0 (Off), 1..24>
5 Calls 4 Calls 3 Calls 2 Calls
Start Channel 1 1 1 1 1
Max Channels 1 4 (256 k) 6 (384 k) 8 (512 k) 12 (768 k)
Start Channel 2 5 7 9 13
Max Channels 2 4 (256 k) 6 (384 k) 8 (512 k) 12 (768 k)
Start Channel 3 9 13 17
Max Channels 3 4 (256 k) 6 (384 k) 8 (512 k)
Start Channel 4 13 19
Max Channels 4 4 (256 k) 6 (384 k)
Start Channel 5 17
Max Channels 5 4 (256 k)
G.703 Board
G.703 Board Interfaces (2:2)
96
Introduction
Quick
Setup
Using
the MPS
System
Status
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
System
Configuration