Filter
Top Products
Getting Started
764 Digital Audio Monitor User Manual
9
Initial Power Up and Configuration
Once you have connected a signal source to at least one of the 764
DIGITAL AUDIO inputs, switch the instrument On. When the start-up
diagnostics are completed, the instrument will begin operation in the
Audio View/Session display.
If a signal source is connected through one of the XLR inputs, the
program level should be shown in the corresponding meters. If the
input is through a BNC connector, you must reconfigure the input with
the following procedure before you can monitor the signal. In either
case, please take this opportunity to familiarize yourself with the 764
front panel controls (Figure 8), menu structure, and techniques.
Figure 8: Controls for initial power up and configuration