Filter
Top Products
2
Getting Set Up
2-12
Phaser 220i and Phaser 220e Color Printers
Connecting the printer
Printer ports
Both the Phaser 220i and Phaser 220e printers accept data through these
ports:
■ LocalTalk
■ Parallel
■ Serial (RS-232)
The Phaser 220i has a SCSI port, which is used only for connecting an
external hard disk. Refer to “Adding a hard disk for font storage (Phaser
220i only)” on page B-3 for more information on the SCSI port.
The Phaser 220i also has an Ethernet connector. An optional Ethernet
interface is required to activate the connector. The optional Ethernet
interface provides Ethernet connectivity with EtherTalk and Novell NetWare
protocols. The TCP/IP protocol is also available by purchasing an
additional option.