Filter
Top Products
6
Troubleshooting
6-12
Phaser 220i and Phaser 220e Color Printers
Startup page prints even though it is disabled
The printer's power-up self-test can detect problems that do not necessarily
make the printer completely inoperable. Examples of these non-fatal errors
include faulty printer ports and some memory failures.
If the printer detects a non-fatal error at power-up, the startup page prints,
even if you have disabled it. In this case, the page contains one or more of
the error messages listed in the following table. Depending on your needs,
you may not need to call for service immediately.
Error messages on the startup page
Message Description
Serial Port failed
Parallel Port failed
LocalTalk Port failed
Ethernet Port failed (Phaser 220i only)
SCSI Port failed (Phaser 220i only)
The named port is not working. The
other ports can still be used.
Font SIMM failed (Phaser 220e only) The optional FONT SIMM is not
working. The printer can still be used,
but only the standard 17 fonts are
available.
DRAM SIMM failed (Phaser 220e only) The memory SIMM is not working.
Since the printer's base memory is still
working, the printer can still be used,
but large image files may not print, and
throughput may suffer.
DRAM SIMM
x
failed (Phaser 220i only) One of the memory SIMMs is not
working. In this message,
x
indicates
the number of the SIMM that failed.
Since the printer's base memory is still
working, the printer can still be used,
but large image files may not print, and
throughput may suffer.