Filter
Top Products
Getting Set Up
2
User Manual
2-17
Note
With the serial port set for variable baud rate, the default baud
rate is 9600, however, you can change the baud rate to a setting
other than 9600. For details, refer to the manual Phaser 220
Drivers and Utilities Printing Reference.
If you have no other connections to make, turn to the topic “Connecting the
power and turning on the printer” on page 2-19. After you turn on the
printer and install a driver on your computer, you must set up your
computer's serial port to match the settings you have selected for the
printer's serial port (see “Setting up PC ports (DOS)” on page 2-28).