Filter
Top Products
Getting Set Up
2
User Manual
2-21
Rear panel at power-up
During the first 40 - 60 seconds of the power-up sequence, the rear-panel
status indicator (
1) goes on and off periodically. After about 40 - 60 seconds,
the status indicator blinks continuously, indicating that the printer is ready
for normal operation.
Sample prints
After the self-tests run successfully, the printer prints three sample prints, if
the sample prints are enabled. These sample prints verify that the printer is
ready for normal operation and show you the brilliant color you can get with
the Phaser 220. The samples take about four minutes to print. The READY
indicator blinks while the sample pages are printing.
When sample prints are enabled, the samples are printed whenever you turn
on the printer. For details on how to disable the sample prints, see “Turning
off the sample prints” on page 2-27.
Note
If the startup page is disabled, the sample prints do not print.
8869-8
Phaser 220i
Phaser 220e
1
1