Filter
Top Products
2
Getting Set Up
2-22
Phaser 220i and Phaser 220e Color Printers
Startup page
When sample prints are disabled, the printer produces a startup page after
the self-tests run successfully, if the startup page is enabled. The printer
takes from 15 to 45 seconds to print the startup page, depending on the type
of transfer roll installed. The READY indicator blinks while the startup page
is printing.
The startup page contains information on printer configuration and error
messages. When enabled, the startup page prints whenever you turn on the
printer. For details on how to disable the startup page, refer to the manual
Phaser 220 Drivers and Utilities Printing Reference.
Note
After the startup page prints, a registration page prints if the
printer has made between 6 and 8 prints since it was built. If you
have not already registered your printer, please do so by filling out
this page and sending it in.
When the printer is ready for operation
When the power-up sequence is complete, both the POWER and READY
indicators remain on, indicating that the printer is ready for operation.