Filter
Top Products
Measuring Waveforms
3–140
TDS 500C, TDS 600B, & TDS 700C User Manual
These points form
the bottom of the mask
These points form
the top of the mask
Left-most point
Right-most point
Top/bottom
dividing line
(not displayed)
Figure 3–67: Creating a User Mask
H To create a mask with a concave side, create several masks to cover the same
area.
H Masks are saved with setups, so you can save sets of masks by defining
them, and then storing the instrument setup. Displayed masks are overwrit-
ten when you recall a stored setup, select a standard mask, or initialize the
digitizing oscilloscope.