Filter
Top Products
TDS 500C, TDS 600B, & TDS 700C User Manual
3–179
Determining Status and Accessing Help
The TDS Oscilloscope can display the status of its internal systems. It also
provides an on-line help system. This section describes how to use the following
two features:
H Status which displays a snapshot of system, display, trigger, waveform, and
I/O settings
H Help which displays a screen of brief information about each oscilloscope
control when that control is operated
Displaying Status
To display the status of the internal systems, perform the following steps:
1. Press SHIFT STATUS ➞ Status (main).
2. Select a status snapshot from the side menu:
System displays information about the Horizontal, Zoom, Acquisition, Measure,
and Hardcopy systems. (See Figure 3–85.) This display also tells you the
firmware version.
Display provides parameter information about the display and color systems.
Trigger displays parameter information about the triggers.
Waveforms displays information about waveforms, including live, math, and
reference waveforms.
I/O displays information about the I/O port(s).
Histo/Masks displays information about histograms and masks.