Filter
Top Products
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 23
1 TROUBLESHOOTING FOR THE HARDWARE
4
Close the Job Separator cover or the Offset Tray cover.
5
Close the automatic duplexing unit.
Paper jam in the Bridge Kit (optional)
3
Close the Bridge Kit cover.
Paper jam in the Finisher MJ-1101 and the Hole Punch Unit MJ-6101 (both optional)
Paper Jam in the upper receiving tray
1
Open the cover holding the handle of the Bridge Kit.
2
Remove the paper inside the Bridge Kit.
If the jammed paper cannot be removed because the right side is
caught by the fuser unit, follow the steps on P.20 “Paper jam in
the fuser unit”.
1
Raise the lever and open the upper receiving tray.