Filter
Top Products
3 Tests and Diagnostics 3.14 Expansion Test
3.14 Expansion Test
To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen. Move the highlight bar to the subtest you
want to execute and press Enter.
NOTE: To execute this subtest, the PC card wraparound connector is required.
Subtest 01 PCMCIA wraparound
This test checks the following signal line of the PC card slot:
Address line
REG#, CE#1, CE#2 line
Data line
Speaker line
Wait line
BSY#, BVD1 line
This subtest is executed in the following order:
Sub# Address Good Bad Contents
01 00001
00001
nn
nn
xx
xx
Address line
REG#, CE#1, CE#2
nn=A0, 90, 80, 00
02 00002 ww rr Data line
ww=write data, rr=read
data
03 00003 –– –– Speaker line
04 00004 40,80 xx Wait line (40<xx<80)
05 00005 nn xx Other lines (BSY#, BVD1)
nn=21, 00
NOTE: When selecting the subtest number 01, the following message will appear.
Specify the slot you want to use.
Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
3-34 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)