Filter
Top Products
3 and Diagnostics 3.27 SETUP
(e) Auto Power On
This option shows the setting for the Auto Power On function and Wake-up
LAN function.
Disabled Parameters for the Auto Power On function and Wake-
up LAN function are set. (Default)
Enabled Parameters for the Auto Power On function and Wake-
up LAN function are not set. (Default)
When the “Enable” is selected, the following menu appears.
Alarm Time = 00:00:00
Alarm Date Option = Disabled
Ring Indicator = Disabled
Wake-up on LAN = Disabled
OPTIONS
Set the parameters for the Auto Power On (automatic power on) function and
the Wake-up on LAN in the “OPTIONS” window. To set the time, use Space
or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the
cursor to the left when you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
“second” cannot be set. When it is set to “Disabled”, the time to turn on
automatically is not set.
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to “Disabled”, the time to turn on automatically is not set.
The Ring Indicator is displayed only when the computer is in Resume mode
and this function cannot be used for a PC card-type modem. When any
modem is not installed, it is not displayed.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to “Enabled” only when “Built-in
LAN” is set to “Enabled”. To activate this function, use the AC adapter.
3-78 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)