Toshiba A1 Personal Computer User Manual


 
3.17 Sound/LAN/Modem Test 3 Tests and Diagnostics
Subtest 03 Modem Test
For this subtest, connect the modem PCB and RJ11 connector with a harness.
This subtest contains the following tests. Use the dedicated “FAT-MODE
inspection device (product code: QE2000P01 made by Nitto Denki
Seisakusyo)” for the tests.
Select 4 to execute and press Enter. The following message will appear:
ICHx MDC Test Program with Modem Sound ( PCB Interface )
Version X.X
* Scorpio Modem Initialize :OK
* Digital Loopback Test :OK
* Modem Sound Test :( Operator’s Check!! )
After a few seconds, the following message will appear:
...Press Key ( Y = OK , N =NG )
If you hear the modem sound from the speakers, press Y. Otherwise, press N.
NOTE: The menu displayed by your computer may be slightly different
from the one shown above.
After you press Y or N, the RJ11 Connection Check (LED) (Operator’s Check
LED) test will be executed, and the following message will appear:
...Press Key ( Y = OK , N =NG )
If the color in the LED of the connection checker is orange, press Y.
Otherwise, press N.
Satellite A10/TECRA A10/Satellite Pro A10 Maintenance Manual (960-445) 3-41