Toshiba A1 Personal Computer User Manual


 
4 Replacement Procedures 4.7 Fan Module/Cooling Fin/CPU
4.7 Fan Module/Cooling Fin/CPU
NOTE: If silicon grease has already been applied to the CPU and fan module, wipe
clean with a cloth and apply new silicon grease. The computer will not operate correctly
if the CPU is not firmly in contact with the fan module.
Removing the Fan Module/Cooling Fin/CPU
The following describes the procedure for removing the fan module/cooling fin/CPU (See
Figure 4-12 to 4-16).
1. Remove the following screws fixing the CPU cover and remove the CPU cover.
M2.5x5 THIN BIND screw x2
M2.5x16 THIN BIND screw x1
M2.5x5 THIN BIND
M2.5x16 THIN BIND
CPU Cover
Figure 4-12 Removing CPU Cover
4-22 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)