Toshiba A1 Personal Computer User Manual


 
3 and Diagnostics 3.27 SETUP
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
6. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LED+AnalogRGB Selects both the internal LCD and the external CRT for
simultaneous display.
NOTE: When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after starting in
Resume mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external CRT, both the internal LCD and the external CRT and TV
display.
You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external CRT display which does not support SVGA mode is connected
and "LED+AnalogRGB"
is selected, the external display is not displayed.
(b) TV Type
This option allows you to select the type of TV.
NTSC (Japan) TV in Japanese system (Default)
NTSC (US) TV in the U.S. system
PAL TV in Europe system
3-76 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)