Toshiba A1 Personal Computer User Manual


 
4 Replacement Procedures 4.5 MDC Modem
4.5 MDC Modem
Removing the MDC Modem
The following describes the procedure for removing an MDC modem (See Figure 4-9).
CAUTION: The power must be turned off when you remove the MDC modem. Removing
an MDC modem with the power on risks damaging the modem or the computer itself.
1. Turn the computer upside down.
2. Remove the screw fixing the MDC slot cover and remove the cover. (This screw is
fixed to the MDC slot cover and can not be removed.)
3. Remove the following screws fixing the MDC modem.
M2x4 BIND screw x2
4. Lift up the MDC modem and remove the MDC modem from the connector PJ3000 on
the system board.
5. Remove the MDC jack cable from JP1 on the MDC modem.
M2.5x4 THIN BIND
MDC Slot Cover
MDC Modem
PJ3000
Screw
JP1
MDC Jack Cable
Figure 4-9 Removing MDC Modem
4-18 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)