Filter
Top Products
4.17 Wireless LAN Antenna/Display Cover/Speaker 4 Replacement Procedures
11. Straighten the edges of the left and right speaker nets (at four point each) using a
device such as a flatblade driver and remove the speaker nets.
12. Remove the following screws securing the hinges to the display assembly. Pull the
hinge outward slightly, then remove it by rotating.
• M2.5x6 PSP TIGHT screw x3 (Left: 2, Right: 1)
• M2.5x6 THIN BIND screw x1 (Right)
M2.5x6 PSP TIGHT
M2.5x5 THIN BIND
Hinge
Hinge
Figure 4-44 Removing Hinges
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-61