Filter
Top Products
3.MAIN UNIT REPLACEMENT
EO18-33016A
3.8 Operation Panel (For the B-SA4TP)
3-18
3.8 Operation Panel (For the B-SA4TP)
1. Open the Ribbon Cover.
2. Remove the two screws and release the two hooks to detach the Operation Panel from the Ribbon
Cover.
3. As shown in the picture below, unhook the Operation Panel Cover.
4. Disconnect the Operation Panel Cable from CN1 on the Panel PC Board.
5. Remove the four screws to detach the Panel PC Board.
Ribbon Cover
Operation Panel
Hook
CN1
Panel PC Board
FLT-3x12 Screw
PT-3x8 Screw
Hook
Ribbon Cover
Operation Panel
Ribbon Cover
Operation Panel Cable
Hook