Filter
Top Products
4. PERIODIC MAINTENANCE PROCEDURE
EO18-33016A
4. PERIODIC MAINTENANCE PROCEDURE
4- 3
(5) In the same way, clean the outside of the cutter blade.
6) When using the strip module, clean the backing paper feed rollers, guide roller, strip roller, and media
path.
1) Open the front cover holding its right side.
2) Press down the release bar to open the strip unit.
3) Remove jammed media or backing paper, if any.
4) Wipe the backing paper feed rollers, guide roller, and strip roller with a soft cloth slightly
moistened with absolute ethyl alcohol.
Outside of the Cutter
Blade
Backing Paper Feed Roller
Guide Roller
Strip Roller
Front Cover
Release Bar
Strip Unit