Filter
Top Products
3.MAIN UNIT REPLACEMENT
EO18-33016A
3.9 Print Head
3-20
3.9 Print Head
1. Fully open the Ribbon Cover.
2. Slightly open the Top Cover (10 mm).
3. Unlock the Print Head by pressing the hooks toward the center. Then pull the Print Head downward.
NOTE: Care must be taken not to damage the Print Head Element by hitting it against any metal parts.
CAUTION!
1. NEVER loosen or remove the following two screws of the Print Head as they have been fine adjusted
before shipment. If they are loosened or removed, print quality may become deteriorated.
2. Do not touch the Print Head Element when handling the Print Head.
NEVER loosen or
remove these
screws.
Ribbon Cover
Top Cover
Hook
Print Head