Filter
Top Products
114
Error Messages - continued
Error Message
Cause / Solution
MIB ACCESSING This message is displayed by pressing any button
on the Operation Panel while the machine is ana-
lyzing the MIB.
Wait until analyzing the MIB is finished.
FTP ACCESSING
This message is displayed by pressing any button
on the Operation Panel while the machine is
transmitting the data in the FTP.
Wait until the FTP transmission is finished.
COMMAND ERROR
The command error occurs while performing the
Network Test.
Call for service.
S-MEDIA NOT EXIST
The Smart Media is not inserted while performing
the Smart Test.
Insert the Smart Media in the Smart Media slot.
RAM 0B:NG
The RAM has become defective.
Call for service.
RAM 1C:NG
The RAM has become defective.
Call for service.
CHKSUM ERR:PROGRAM
The programming data has been damaged.
Call for service.
CHKSUM ERR:FUNCTION
The function setting data has been damaged.
Call for service.
CHKSUM ERR:LANGUAGE
The language data has been damaged.
Call for service.
CHKSUM ERR:BOOT
The boot programming data has been dameged.
Call for service.