Filter
Top Products
94
Frame Type Setting
Press:
+
+
+
+
Display the NETWORK
(NOVELL) Menu
1
01.DONE
02.IPX/SPX PROTOCOL
03.FRAME TYPE
Display the FRAME
TYPE Menu
2
Press:
+
Select the frame type
3
This allows you to change the
frame type of the Network In-
terface Card.
When the machine connects to
the NetWare server, the ma-
chine uses this frame type.
NOTE:
The “AUTO” is set as the
default frame type.
FRAME TYPE
01.AUTO
02.802.3
03.ETHENET II ↓
04.802.3 SNAP
05.802.2
These items are outside the
LCD frame. To view them,
use the [ ] scroll key.
Select the desired frame type.
Press:
+
(for AUTO)
+
(for 802.3)
+
(for ETHENET II)
+
(for 802.3 SNAP)
+
(for 802.2)
OPERATION COMPLETED
Displayed for 2 seconds
The display returns to Step 1.
The display returns to Step 1.
Continue to set another item, or
press
+ to select
“1.DONE” to exit the Menu Op-
eration mode and return to the
Standby Mode.
When “1.DONE” is selected,
the Network Interface Card
starts initializing. Wait for few
minutes until the Network Inter-
face Card completes initializ-
ing.