Filter
Top Products
14
Sending E-mail by Direct Input - continued
If you know the resolution ca-
pability of the recipient ma-
chine, press:
If you do not know the resolu-
tion capability of the recipient
machine, press:
PRESS MODE KEY
ON CONTROL PANEL
THEN PRESS ENTER
When “1.YES” is selected, the
following screen appears. Con-
tinue to Step 3a.
When “2.NO” is selected, the
following screen appears. Skip
to Step 5.
Press until the required resolution mode is indicated by
the appropriate LED.
Resolution Setting
3a
This setting will allow you to
specify the resolution for the
documents you are sending, if
you know the resolution capa-
bility of the recipient machine.
Select the Resolution
3
Ultra-Fine Mode
Standard Mode (when all the lamps are extinguished)
Fine Mode
Each corresponding
lamp is illuminated.
Ultra-Fine Halftone Mode
Fine Halftone Mode
The mode changes as follows:
* When Ultra-Fine is selected, the DF120F/DP125F will scan all
documents at 406 dots/inch horizontal x 391 lines/inch vertical.
Depending on the capabilities of the remote facsimile receiving
this document, the document may be transmitted by the
DF120F/DP125F at Ultra-Fine resolution (406 dots/inch hori-
zontal x 391 lines/inche vertical) or it may be transmitted at
Super Fine (203 dots/inch horizontal x 391 lines/inch vertical).
)
: illuminated
: extinguished
(
FINE
U-FINE
HALFTONE
FINE
U-FINE
HALFTONE
FINE
U-FINE
HALFTONE
FINE
U-FINE
HALFTONE
FINE
U-FINE
HALFTONE
Then press:
DO YOU KNOW RECEIVER
COMPRESSION?
1.YES
2.NO