Filter
Top Products
53
The following table describes the Initial Setup Flow according to your conditions or
needs.
To use the functions, the network configuration for this machine must be set up
correctly. For the values of the network configuration, contact to your network
administrator.
TCP/IP Configuration Setup
The items and the parameter values for the TCP/IP Configuration Setup differs
whether the IP address of this machine is obtained from a DHCP server or assigned
manually.
➤P54 TCP/IP CONFIGURATION SETUP
NOTE:
When you want to set to SMTP for the Receive Mode, the IP address must be
assigned manually.
••
••
• BootP/DHCP
Set to enable or disable the BootP/DHCP whether obtaining the IP address from
the DHCP server. When the TCP/IP settings of this machine are provided by the
DHCP server, set this to ON. Set this to OFF the BootP/DHCP when you want
to assign the TCP/IP settings manually.
••
••
• IP Address
Assign the IP address of this machine. Do not set this when the IP address is
obtained from the DHCP server. The machine uses the IP address here even if
the BootP/DHCP is set to be enabled.
••
••
• Subnetmask
Assign the Subnetmask if required.
••
••
• Default Gateway
Assign the Default Gateway address when the machine is used in the network
through a router.
••
••
• Host Name
Set the name of this machine. This name is used as the sender name for E-
mails.
SETUP - SETUP FLOW
E-mail Account Setup
The items and the parameter values for the E-mail Account Setup differs whether
the machine uses POP or SMTP for the Receive Mode. Available functions vary
according to the type of the Receive Mode. For further details, refer to “INTRO-
DUCTION - FEATURES”.
➤P59 E-MAIL ACCOUNT SETUP
NOTE:
When the IP address is obtained from the DHCP server, the Receive Mode
cannot be set to SMTP.
E-mail Properties Setup
You can also configure the E-mail properties. After the machine is set up, it is
recommended to configure the E-mail properties to use Internet Fax features.
➤P68 E-MAIL PROPERTIES SETUP
Onramp Gateway Setup
In order to use the Onramp Gateway Transmission, you must set some configura-
tions correctly.
➤P80 ONRAMP GATEWAY SETUP
Offramp Gateway Setup
In order to use the Offramp Gateway Transmission, you must set some configura-
tions correctly.
➤P85 OFFRAMP GATEWAY SETUP
Additional Functions Setup
The setup functions for Novell and Network utilities (FTP) become available when
the Internet Fax Kit is fitted, though they are not used for Internet Fax setup.
➤P90 ADDITIONAL FUNCTIONS SETUP
Item Use DHCP Server Assign IP Address
BootP/DHCP Set to ON Set to OFF
IP Address Not required Required
Subnetmask Not required Required if necessary
Default Gateway Not required Required if necessary
Host Name Required Required
Item POP SMTP
E-mail Address Required Required
Error E-mail Forward Address Required Required
Receive Mode Set to POP SMTP
POP Server Address Required Not required
POP Time Required Not required
POP Login Name Required Not required
POP Password Required Not required
SMTP Server Address Required Required