Filter
Top Products
93
IPX/SPX Protocol Setting
Press:
+
+
+
+
Display the NETWORK
(NOVELL) Menu
1
01.DONE
02.IPX/SPX PROTOCOL
03.FRAME TYPE
Display the FRAME
TYPE Menu
2
Press:
+
Select the IPX/SPX
Protocol Mode
3
This allows you to enable or
disable the Network Interface
Card to connect using the IPX/
SPX protocol.
When the machine connects to
the NetWare server, the IPX/
SPX protocol must be set to
ON.
NOTE:
This is set to ON as a fac-
tory default.
IPX/SPX PROTOCOL
01.ON
02.OFF
OPERATION COMPLETED
Enable or Disable to use the
IPX/SPX Protocol.
(for ON-Enable)
(for OFF-Disable)
Displayed for 2 seconds
The display returns to Step 1.
Continue to set another item, or
press
+ to select
“1.DONE” to exit the Menu Op-
eration mode and return to the
Standby Mode.
When “1.DONE” is selected,
the Network Interface Card
starts initializing. Wait for few
minutes until the Network Inter-
face Card completes initializ-
ing.