Filter
Top Products
15
Sending E-mail by Direct Input - continued
Compression Setting
4a
Select the desired Compres-
sion.
Press:
(for MH)
(for MR)
(for MMR)
(for JBIG)
NOTE:
If you do not know the
receiver’s capabilities for
the compression type, se-
lect “MH”.
Select the Compression
4
Scan the document
5
Your machine will automatically
start scanning the document
into memory (if enabled).
If the document is not loaded in
the Document Tray, the follow-
ing screen is displayed.
LOAD DOCUMENT
SCANNING INTO MEMORY
FILE NUMBER= 007
RESIDUAL MEMORY 98%
SCANNING PAGE : 003
After scanning, the machine
starts transmission.
Load the document in the
Document Tray. Then your
machine will automatically
starts scanning the document.
If you know the compression
capability of the recipient ma-
chine, press:
If you do not know the com-
pression capability of the re-
cipient machine, press:
When “1.YES” is selected, the
following screen appears. Con-
tinue to Step 3a.
When “2.NO” is selected, the
following screen appears. Skip
to Step 5.
This setting will allow you to
specify the compression for the
documents you are sending, if
you know the compression ca-
pability of the recipient ma-
chine.
These items are outside the
LCD frame. To view them,
use the [ ] scroll key.
COMPRESSION
1.MH
2.MR
3.MMR ↓
4.JBIG