Filter
Top Products
123
USING THE
OPTIONAL
SORTER
2. NON-SORT COPYING
1
2
Key in the desired copy quantity.
● When 250 or less is copied at a time, all the
copies will exit into the non-sort bin.
When you use the optional automatic
document feeder, the total number of copies
(the number of originals X copy quantity)
should be 250 or less.
● When more than 250 is copied at a time, the
specified number of copies will exit into sort
bins "1" up to "20", then the remaining copies
will exit into the non-sort bin.
● If more than 850 (A4) or 750 (A3/B4/A4-R) is
copied at a time, the copier automatically
stops when 850 (or 750) copies have been
completed, and the following message
appears:
Remove paper from sorter bins
Remove all the copies from the staple sorter
and press the START key again to continue.
3
4
5
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the original.
Check that NON-SORT, NON-STAPLE is
displayed on the Basic menu.
● If SORT , GROUP or STAPLE SORT is
displayed, press the key and select NON-
SORT, NON-STAPLE .
Select the desired copy size, reproduction
ratio, image density level, etc. if necessary.
Press the START key.
Note: When the staple sorter is working, do not
touch the bins.
Paper size Sort bins Non-sort bin Total
A4 1st~600th copy 601st~850th copy 850 copies
(30 copies/bin)
A3, B4
1st~500th copy 501st~750th copy 750 copies
A4-R (25 copies/bin)