Filter
Top Products
72
Set the desired image density level, copy
quantity, etc.
● Maximum copy quantity for the 2 in 1 duplex
copying is as shown below.
80g/m
2
: 50 (all sizes)
90g/m
2
: 40 (all sizes)
5
6
Note: For automatic stapling in the 2 in 1 mode,
the stapling position is the right bottom
corner rather than the normal left upper
corner of the copy, as shown on the right.
If you want to staple on the left upper
corner, change the direction when
copying has been finished and use the
manual stapling mode (see page 127).
6. 2 IN 1 MODE COPYING (Cont.)
Press the START key.
A
1
B
2
A
1
B
2
Normal stapling position
Stapling position in 2 in 1
(right bottom corner)
Enter the number of the originals.
● To have copies arranged in the correct page
order in 2 in 1 copying, it is necessary to let
the copier know the number of originals in
one of the following ways:
● When the operator knows the number of
originals:
→ Key in the number of the originals.
● When making the copier count the number
of originals:
→ Press the Original Count key.
The copier starts counting the originals
automatically. When it finishes counting them,
this message appears:
Put originals in doc. feeder
Then reset the originals in the original feed
tray in the same way as described in step 1.
3
4
Press the SET key.