Filter
Top Products
34
1
Selecting the Original Size and the Copy Size
3
4
Press the ZOOM ORG. A4 KEY.
Press the desired COPY-SIZE key.
● The copier calculates the correct reproduction
ratio based on the selected original size and
copy size, and displays the reproduction ratio
on the reproduction-ratio display.
(See page 103 for how to use the UNIV key.)
● If the desired size of paper is not in any of
the installed cassettes, the following message
appears:
Set correct cassette
Install the correct-sized cassette or use the
sheet bypass.
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
2
Press the ORIGINAL SIZE key of the same
size as the original to be copied.
5
6
Select the desired image density level and
copy quantity.
Press the START key.
Tip: If there are sheets of paper set on the
sheet bypass, you must press the COPY-
SIZE key corresponding to the sheets
(see page 41).
6. REDUCTION AND ENLARGEMENT COPYING (Cont.)