Filter
Top Products
92
8
Press the START key.
6
7
Set the repeat number.
● To change the repeat number:
Press the 2 or 8 key to select the desired
repeat number, and press the SET key.
Select the desired copy size, image density
level, copy quantity, etc. if necessary.
13. IMAGE REPEAT
(Cont.)
4
Following the “Specifying an Area” on page
84, key in the values of the area to be
repeated (X1, X2, Y1 and Y2) with the
digital keys and press the lower SET key.
● If the entire original will be repeated:
X1=0(mm), Y1=0(mm)
X2, Y2=arbitrary
5
Place the original on the glass face down
with its bottom toward you and with its
top left aligned against the original scale
on the left side.
Tip: If the repeat number is not set, the copier
automatically repeats the original once.
Only the length direction is available for
repeat copying, and the original can be
repeated up to 8 times.
3
Place the original on the glass face up with
its bottom toward you and with its top left
aligned against the original scale on the
left side.
Tip: If the setting of the paper size or the
repeat number is not made appropriately,
the image may not be copied completely.