Filter
Top Products
28
When the power switch is turned ON, the Automatic Paper Selection (APS) mode is selected
as the default mode.
In this mode, if you place an original on the document feeder or on the glass, the copier
automatically detects the size of the original, and selects paper of the same size as the original.
This mode is available only for actual-size (100%) copying.
Check that the Automatic Paper Selection
mode is selected.
● If APS is not indicated, press the ZOOM
ORG.➞A4 key and select APS .
1
2
● After aligning the edges of the originals, set
them
face up on the original feed tray and
align the slides to the edges of the originals.
● See page 24 for the number of the originals
you can set up at a time.
● When the START key is pressed, the sensor
detects the size of the first original, and selects
the paper size matched to the original.
When Using the Reversing Automatic Document Feeder
5. COPYING IN THE AUTOMATIC PAPER SELECTION MODE
Slides
Place the original(s) on the original feed
tray or on the glass.
Note: Remove any paper clips or staples from
the originals before placing them on the
original feed tray.
Procedure