Filter
Top Products
USING THE
EDITING
FUNCTIONS
63
Yellow
indicator line
4
5
6
Tip: Margins can be created also in the bypass
copy mode. To do this, set the paper in the
sheet bypass (see page 42), and press the
desired COPY-SIZE key to select the desired
paper size.
Press the START key.
Select the desired copy size, image density
level, reproduction ratio and copy quantity.
Place the original on the glass.
● The book should be centred on the yellow
indicator line with its bottom toward you.
2
Select on which side the margin is to be
created.
● Press the BOOK key.
● If you select the BOOK margin, use it in
conjunction with the DUPLEX COPYING mode
from book originals (page 79) or DUAL PAGE
mode (page 68).
Margin on the Book Originals
3
After having adjusted the margin, press
the SET key.
● The default margin is 14 mm.
● To adjust the margin:
Press the
2mm
or
30mm
key to select
the desired margin setting, and press the SET
key.
3
After having adjusted the margin, press
the SET key.
● The default margin is 7 mm.
● To adjust the margin:
Press the
0mm
or
30mm
key to select
the desired margin setting, and press the SET
key.
● In duplex copying, margins in the back are
created on the other side of those in the front.
See page 73 for duplex copying.