Toshiba FC15 Fax Machine User Manual


 
41
HOW TO
MAKE
COPIES
Bypass copying is convenient when the size of any paper cassettes installed in the copier is
not the size you require or when you want to use special sizes of paper such as A3-wide
(305X457mm) paper or special types of paper such as thick paper and OHP films(transparency
or sticker labels).
10.
BYPASS COPYING (THICK PAPER/OHP FILM)
Bypass Copy Mode
This copier has bypass copy modes corresponding to paper types.
Refer to the table below and select the mode corresponding to the sheets. Otherwise, it may
cause paper jams or lower the image quality.
The number of sheets that can be set at a time differs depending on paper type.
Setting more than specified number of sheets at a time may cause copier failure or paper jams.
Be sure to set within the specified range.
The range of acceptable paper sizes is from A3-wide to A5-R.
Bypass Copy Mode Corresponding Paper Type Maximum Capacity
PLAIN
Plain paper (64-80g/m
2
) approx.50 sheets
Plain paper (81-90g/m
2
) approx.40 sheets
305X457mm *A3-wide (64-105g/m
2
) approx.30 sheets
OHP FILM OHP films approx.20 sheets
THICK 1 Thick paper (91-105g/m
2
) (excluding A3-wide) approx.30 sheets
THICK 2 Thick paper (106-140g/m
2
)
THICK 3
Thick paper (141-209g/m
2
) approx.20 sheets
Thick sticker labels
*A3-wide paper = 304.8mmX457.2mm