Filter
Top Products
24
The optional Reversing Automatic Document Feeder automatically feeds and copies sheet
paper originals placed on the feeding tray one at a time. This is called the “continuous feed
mode.” You can also manually feed originals in one sheet at a time. This is called the “single
feed mode.” If you feed in two-sided originals, this document feeder automatically reverses
originals after they have been copied so that their reverse sides can be copied.
Use originals with a paper weight in the range of 60 to 105 g/m
2
.
1
3
If the surface of the originals is so rough that they cannot
be moved when two of them are pinched between two
fingertips, or if the surface has been processed, these
originals could not be used because the automatic
document feeder may not be able to separate them.
6
(1) Badly wrinkled or folded originals. In
particular, originals
whose leading edge
is curled may be
misfed.
Folded or curled originals should be smoothed out before
being set on the reversing automatic document feeder.
(4) Clipped or stapled originals
4
(2) Carbon paper
(3) Taped originals (6) Damp originals (7) OHP film originals
(5) Torn originals (including those with holes
in them)
Do not mix originals of different widths at the same time.
5
Precautions When Feeding Originals
4. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (OPTIONAL)
Do not use the following types of originals as they tend to misfeed or become damaged
in the reversing automatic document feeder:
The number of the originals you can set up at a time differs depending on their size.
2
60~90g/m
2
91~105g/m
2
A4, A4-R, A5-R 50 40
FOLIO 35 25
A3 25 20