Filter
Top Products
36
7. COPYING WITH COPY DENSITY SELECTION
There are two modes of adjusting the image density and background level of the copy.
In the manual copy density mode, you can produce lighter or darker copies.
In the automatic copy density mode, the copier automatically detects the density of the original,
and selects the optimum image density and background level. This mode is suitable for originals
containing only text and illustrations. Originals with black areas and halftoned originals should
be copied in the manual copy density mode.
1
4
● To produce darker copies, press the key.
Each time you press the key, the density-
indicating mark moves one step to the right,
and your copies are produced proportionally
darker.
Copying in Manual Density Mode
Press the or key to change the
copy density.
● To produce lighter copies, press the key.
Each time you press the key, the density-
indicating mark moves one step to the left,
and your copies are produced proportionally
lighter.
Press the START key.
● Copies are made in the selected copy density
level.
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
2
Set the desired copy size, reproduction
ratio and copy quantity if required.
3