Filter
Top Products
USING THE
SPECIAL
FUNCTIONS
95
When the display on the right appears, set
the chart face down on the glass and with
its bottom toward you and its top left
aligned against the original scale on the
left side, in order that the black line comes
to the left side.
7
8
Press the START key to start the first
calibration.
● If the chart is not properly set, the following
message appears:
Set chart correctly
Repeat the calibration in step 6.
Notes:
● If the glass is dirty or any foreign objects are
stuck to the glass, calibration may not be
operated properly. Keep the glass clean.
● Interrupt copying is not available during
calibration.
5
Press the TEST PRINT key to print out the
chart for calibration.
6
Press the CALIBRATION key after the
chart has been output.