Filter
Top Products
15
DESCRIPTION
OF THE DIGITAL
COPIER
q CHECK ORIGINAL symbol
This symbol flashes when an original is misfed
inside the automatic document feeder. (Page 147)
w BYPASS MISFEED symbol
This symbol flashes when no paper is fed into the
copier in bypass copying. Remove and reset the
sheets on the sheet bypass. (Page 148)
e ADD TONER symbol
This symbol flashes when the toner supply in the
cartridge runs out. (Page 136)
r CLEAR PAPER symbol
This symbol flashes when paper is misfed on the
paper path inside the copier. (Page 138)
t CLEAR PAPER symbol
This symbol flashes when a sheet of paper fed
from the large-capacity feeder is misfed in the
paper feed section. (Page 146)
y CLEAR PAPER symbol
This symbol flashes when a sheet of paper fed
from the selected cassette is misfed in the paper
feeding section. (Page 145)
u STACK symbol
This symbol flashes when sheets of paper copied
on one side are stacked in the duplexer. This
symbol also flashes when sheets of paper are left
in the duplexer. In this case, remove paper from
the duplexer.
i CLEAR PAPER symbol
This symbol flashes when paper is misfed
in the automatic duplexer. (Page 143)
o CLEAR PAPER symbol
This symbol flashes when paper is misfed
on the transfer belt. (Page 138)
!0 REPLACE TONER BAG symbol
This symbol flashes when the toner bag
becomes full of used toner. (Page 134)
!1 CLEAR PAPER symbol
This symbol flashes when paper is misfed
in the fuser unit. (Page 138)
!2 SORTER MISFEED symbol
This symbol flashes when paper is misfed
in the optional staple sorter. (Page 149)
!3 CALL SERVICE symbol
This symbol flashes when maintenance
by a service technician is necessary.
(Page 154)
The graphic on the Message Display panel shows the status of the copier. When one of the graphic
symbols flashes, take the appropriate action referring to the page shown.
5.
DESCRIPTION OF THE GRAPHIC DISPLAY
!3
!2
!1
!0
oiu y
q
w
e
r
t