153
WHEN THE
GRAPHIC SYMBOLS
FLASH
4
Pull out the slider fully toward you (arrow).
Slider
6
Push the slider fully in.
● Make sure that the lever has moved up to
latch the slider. If not, pull the lever up by
hand.
Lever
Slider
7
Replace the stapler unit in the staple sorter
and tighten the wing nut. Close the stapler
cover.
5
Remove the jammed staple.
Wing nut
8
Remove the remaining sheets from the
staple sorter and turn ON the power switch.
9
Referring to page 127 "Manual Stapling",
staple a few sheets of paper manually to
check that stapling is performed correctly.