Filter
Top Products
Either a 2-pin or 3-pin adaptor/cord will be included with the tablet
depending on the model.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on
the left of the tablet.
Figure 1-5 Connecting the DC output plug to the tablet
1
2
1. DC IN 19V jack 2. DC output plug
3. Plug the power cord into a live wall outlet - the Battery and DC IN
indicators on the front of the tablet should glow.
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
Slide the power switch to turn on the tablet.
Figure 1-6 Turning on the power
1
1. Power switch
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
PORTÉGÉ M930
User's Manual 1-6